Lift and Tilt Units

Lift 'n' Tilt Units are designed to provide front end lift as well as tilting up to 33° from the horizontal.

Typical applications include:

• Raising a container to a convenient operator height to minimise bending or stretching
• Lifting the drainage spout of a drum clear of the floor during the discharge of liquids from containers
• Designed to provide front end lift as well as tilting up to 33°
• Reduce problems of lost working days caused by work related back disorders, referred to as MSD
• Low profile for floor mounted or pit recessed versions
• Base frame versions for stacker truck loading

For floor mounted Lift 'n' Tilt Units, a run up ramp may be required for loading. For more information and pricing for run up ramps, see our accessories page.

All Tilt Units come with standard goal post type anti-slide bars

Model	Capacity kg	Length mm	Width mm	Max Open Height mm	Closed Height mm	Max Tilt Degrees
Floor Mounted or Pit Recessed
LTU 025 125 080	250	1250	800	360	95	33°
LTU 050 125 080	500	1250	800	360	95	33°
LTU 100 125 100	1000	1250	1000	360	95	33°
LTU 150 125 100	1500	1250	1000	360	95	33°

Model	Capacity kg	Length mm	Width mm	Max Open Height mm	Closed Height mm	Max Tilt Degrees
Free Standing (on Base Frame) for Stacker Truck or Forklift Loading
LTU 025 125 080 P	250	1250	800	500	240	33°
LTU 050 125 080 P	500	1250	800	500	240	33°
LTU 100 125 100 P	1000	1250	1000	500	240	33°
LTU 150 125 100 P	1500	1250	1000	500	240	33°

Due to continuous technical developments, specifications may be modified without notice.

The maximum bottom end lift height is relative to the maximum tilt angle. At 33° all of the above units would have a maximum lift height (from floor to the bottom of slide stop) of 360mm. For different height/tilt angle combinations please contact us. The closed height of the floor mounted units is 95mm and of the free standing (base frame mounted) versions 240mm.